NCR Leggera 2011 Specification
|
|---|
| Displacement: | 1078.00 ccm (65.78 cubic inches) |
| Engine type: | V2, four-stroke |
| Engine details: | Ducati DS 1100 engine. Optional 125 HP bore. |
| Power: | 90.00 HP (65.7 kW)) @ 7750 RPM |
| Valves per cylinder: | 2 |
| Fuel system: | Injection. EFI Magneti Marelli, 45mm throttle bodies. |
| Fuel control: | Desmodromic valve control |
| Cooling system: | Oil & air |
| Gearbox: | 6-speed |
Transmission type,
final drive: | Chain |
| Exhaust system: | Full exhaust 2 into 1 into 2 configuration with catalitic converter and lambda system. Exhaust is in titanium and the mufflers are in carbon. Design by NCR and built by Zard, the silencers are 45% lighter than stock. |
| Chassis, suspension, brakes and wheels |
|---|
| Frame type: | Trellis frame made entirely of Grade 9 Titanium. Weight: 4,8 Kg (10.6 lbs) |
| Front suspension: | Ohlins titanium nitride coated 46mm full adjustable with NCR Corse valving, adjustable offset NCR triple clamps made in avionic aluminum. NCR Corse billet fork bottoms |
| Rear suspension: | NCR- Ohlins monoshock, fully adjustable including low and high speed circuits and configured by NCR CORSE |
| Front tyre dimensions: | 120/70-17 |
| Rear tyre dimensions: | 180/55-17 |
| Front brakes: | Double disc. WAVE rotors, radial monoblock Brembo Racing calipers with 4 pistons and 2 pads. |
| Front brakes diameter: | 300 mm (11.8 inches) |
| Rear brakes: | Single disc. WAVE rotor, Brembo 2 piston caliper |
| Rear brakes diameter: | 200 mm (7.9 inches) |
| Wheels: | Carbon fiber, front 3,50´x17´ , rear 6´x17´ |
| Physical measures and capacities |
|---|
| Dry weight: | 157.0 kg (346.1 pounds) |
| Power/weight ratio: | 0.5732 HP/kg |
| Other specifications |
|---|
| Starter: | Electric |
| Seat: | Biposto leather seat by Schedoni per NCR. |
| Color options: | NCR Grey/silver. Other colors optional. |
| Comments: | Rear ward and adjustable NCR rear set in Al 7075 and titanium, passenger peg support in tiatnium, custom gas cap by NCR in Al7075, billet NCR CORSE fork bottoms and fully adjustable triple clamps in avionic aluminum. Adjustable ride height adjuster and rear single sided flange in aluminum. |
0 comments:
Post a Comment