Moto Guzzi V7 Classic 2011 Specification
|
|---|
| Displacement: | 744.00 ccm (45.40 cubic inches) |
| Engine type: | V2, four-stroke |
| Engine details: | 90° V-Twin |
| Torque: | 54.70 Nm (5.6 kgf-m or 40.3 ft.lbs) @ 3600 RPM |
| Compression: | 9.6:1 |
| Bore x stroke: | 80.0 x 74.0 mm (3.1 x 2.9 inches) |
| Valves per cylinder: | 2 |
| Fuel system: | Injection. Weber-Marelli |
| Fuel control: | OHC |
| Lubrication system: | By lobes with pressure pump |
| Cooling system: | Air |
| Gearbox: | 5-speed |
Transmission type,
final drive: | Shaft drive (cardan) |
| Clutch: | Single disc, dry, with cush drive |
| Driveline: | Primary drive: Helical gears, ratio: 16/21=1 : 1,3125. Secondary drive: shaft, ratio 8/33=1 : 4,825 |
| Emission details: | 3 ways catalyzed with Lambda sensor |
| Chassis, suspension, brakes and wheels |
|---|
| Frame type: | Detachable tubular duplex cradle in special high-strengh steel |
| Rake (fork angle): | 27.5° |
| Trail: | 109 mm (4.3 inches) |
| Front suspension: | Marzocchi hydraulic telescopic fork |
| Front suspension travel: | 130 mm (5.1 inches) |
| Rear suspension: | Swinging arm in light cast alloy with two dampers, preload adjustable |
| Rear suspension travel: | 118 mm (4.6 inches) |
| Front tyre dimensions: | 110/70-17 |
| Rear tyre dimensions: | 130/80-17 |
| Front brakes: | Single disc. Bremo |
| Front brakes diameter: | 320 mm (12.6 inches) |
| Rear brakes: | Single disc. Bremo |
| Rear brakes diameter: | 260 mm (10.2 inches) |
| Wheels: | Spoke light alloy |
| Physical measures and capacities |
|---|
| Dry weight: | 182.0 kg (401.2 pounds) |
| Weight incl. oil, gas, etc: | 198.0 kg (436.5 pounds) |
| Seat height: | 805 mm (31.7 inches) If adjustable, lowest setting. |
| Overall length: | 2,185 mm (86.0 inches) |
| Overall width: | 800 mm (31.5 inches) |
| Fuel capacity: | 17.00 litres (4.49 gallons) |
| Other specifications |
|---|
| Starter: | Electric |
| Color options: | Guzzi black, White diamond |
0 comments:
Post a Comment